15
SYSTEM DEFINITIONS
1
2
3
Pullout
Manual Release
Aisle side Rotational Arm may be manually pulled out in order to release the WMD,
regardless of the Rotational Arm position or power supply condition (reference
Manual Release section).
Fast blinking lights on Marker Light, Occupant Interface and Occupant Switch on
Driver Interface while a steady Alert Beep is heard.
The QUANTUM® Securement System MUST be
serviced after every Manual Release.
Secure
Release
ON
OFF
Master Switch Occupant Switch
Driver Interface
Master Switch
(On/Off Occupant Interface)
Used to disable the Occupant Interface
when not in use and enable the
Occupant Interface when in use.
Occupant Switch
Used for communicating, commanding
movement, indicating current
status, Securing and Releasing the
QUANTUM® from the Driver Interface.
Reset Switch
Used to reset (turn OFF and ON) the
QUANTUM® when power failure occurs,
when its sequence is disrupted or once
obstruction is removed.
Driver Interface
QUANTUM® Key with Manual
Release Card
Key opens the Manual Release
Cover on the Rotational Arm.
Manual Release Card gives quick
instructions on how to release the
QUANTUM® Rotational Arm which
releases the Wheeled Mobility
Device (WMD).
MANUAL RELEASE
1. Insert Quantum® Key (or Quarter) in the
slit on the Manual Release Cover and
turn it to the right (cover pops out).
2. Flip out the Black Release Lever,
turn it 90 degrees to the
left and remove the
Manual Release.
3. Pullout Rotational Arm in
order to release the wheelchair.
Unit MUST be serviced
after every Manual Release.
Pullout
3
2
1
See Video,
Scan QR Code
1
2
3
Pullout
To Next Page
Loading...
Need help?
General
