17
OPERATIONAL SEQUENCE
The following is a quick guide on how the QUANTUM® Securement System works.
Complete instructions are in the Use and Care Manual.
OPERATING SEQUENCE
1
#
IMAGE
Stow: Aisle side Rotational Arm is in
the Stow position, pulled in tight against
the QUANTUM® Docking Block.
2
Deploy: Occupant presses the one-touch
Occupant Interface to Deploy the QUANTUM®.
Aisle side Rotational Arm goes from the vertical
position to the horizontal position.
3
Engage: Both horizontal Arms, Engage inward
to capture the Wheeled Mobility Device (WMD).
4
Secure: Once the QUANTUM® has captured the WMD,
the operator presses the Secure Button on Driver
Interface to lock WMD in place. The occupant places
the Shoulder and Lap Belt over shoulder and hips and
buckles (ONLY for US). Both QUANTUM® Arms hold
the WMD in place and continue to maintain their grip
throughout the trip.
WMD
ELECTRICAL REQUIREMENTS
Power Supply
• All equipment and components must be installed and serviced by an experienced and trained technician.
• The QUANTUM® requires a continuous power source of 15 Amps at 11-15 VDC or 10 Amps at 22-28 VDC.
If a continuous power source is not available, a DC to DC converter MUST be used.
To Next Page
Loading...
Need help?
General
