43
TROUBLESHOOTING
IMAGE
ANSWER
The QUANTUM® has no power.
PROBLEM
Make sure the wire being used is 18 gauge.
There MUST be a minimum power of 15
Amps at 11-15 VDC or 10 Amps at
22-28 VDCgoing to the QUANTUM®. Make
sure the vehicle’s ignition and parking
brake are on.
Driver Interface is not working.
Make sure the wire being used is 22 gauge
and check wire connections at both ends.
Occupant Interface
is not working.
Make sure the wire being used is 22 gauge
and check wire connections at both ends.
Occupant Interface
is not working.
Make sure the Master Switch on the
Driver Interface is in the “ON” position.
The QUANTUM® has restarted
the same function several
times but has not completed
the function.
Make sure there is nothing obstructing
the QUANTUM®, if so remove it and
resume function.
The QUANTUM® is not
responding because system
restarted
too many times.
Let the QUANTUM® cool down for about
1 minute and then restart it again.
To Next Page
Loading...
Need help?
General
