Safety Instructions
1.Read Instructions - All safety and operation instructions should be read before this unit is operated.
2. Keep instructions - The operating instructions should be retained to serve for future reference.
3. Observe Warnings - All warnings on the appliance and in this operation manual should be strictly followed.
4. Water and Moisture - This unit should not be used near water - for example, near bathtub, washbowl, kitchen sink, laundry
tub, in a wet basement or near a swimming pool, etc.
5.Heat - This unit should be placed away from heat sources, such as radiators or other devices which produceheat.
6.Power cord protection - The power supply cords should be routed so that it is not likely to be stepped on orpinched by
objects placed on or against them.
7. Non-use periods - The power cord of the unit should be unplugged from the outlet when the unit is not usedfor a longer
period.
8. Object and liquid entry - Care should be taken so that objects do not fall and liquids are not spilled into the inside of the unit.
9.Damage requiring service - Unplug the unit and refer servicing to qualified service personnel under thefollowing conditions:
*Objects have fallen, or liquid has spilled into the unit; or
*The unit has been exposed to rain; or
*The unit does not appear to operate normally or exhibits a marked change in performance; or
*The unit has been dropped, or its chassis damaged; or
*When the power cord or plug is damaged.
10.Servicing - The user should not attempt to service the unit beyond those means described in this operating manual. All other
servicing should be referred to qualified personnel.
11.To prevent electric shock - Do not use the polarised plug with an extension cord, receptacle or other outlet unless the
prongs can be fully inserted to prevent contact exposure.
12.Grounding or polarisation - Precautions should be taken so that the grounding or polarisation means of theunit is not
defeated.
13.Internal voltage selector and fuse - The internal line voltage selector and the appropriate fuse should only be reset and
reequipped foralternate voltage by a qualified service technician. For more information, contact your authorised dealer.
14.Ventilation - Slots and openings in the unit are provided for ventilation, to ensure reliable operation and to
prevent overheating of the unit. These openings should not be blocked or covered!
4
PTH SeriesUser Manual
To Next Page
Loading...
Need help?
General
