EasyManuals Logo
Home>Qlima>Air Conditioner>PH534

Qlima PH534 User Manual

Qlima PH534
Go to English
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
G
Never turn the appliance off by unplugging from the mains. Always press
the button
, then wait for a few minutes before unplugging. This
allows the appliance to perform a cycle of checks to verify operation.
DESCRIPTION OF THE DISPLAY SCREEN
Plug into the mains socket, then the appliance is standby. Press the
button
to make the appliance turn on. The last function active when it was turned
off will appear.
COOL MODE
Ideal for hot muggy weather when you need to cooling and dehumidify the room.
To set this mode correctly:
• Press the M button a number of times until the
symbol appears.
Select the target temperature18°C-35°C(64 °F-90°F) by pressing the /\ or v
button until the corresponding value is displayed.
• Select the required fan speed by pressing the
button.
Three speeds are available:
Maximum speed: for maximum fan power
Medium speed: reduces noise levels but still maintains a good level of comfort
Low speed: for silent operation
The most suitable temperature for the room during the summer varies from 24°C
to 27°C(75°F to 81°F ). You are recommended, however, not to set a temperature
much below the outdoor temperature. The fan speed difference is more
noticeable when the appliance is under FAN mode but may not be noticeable
under COOL mode.
HEAT MODE
* means only the heat pump model have this function.
To set this mode correctly:
• Press the M button a number of times until the
symbol appears.
Select the target temperature 13”C-27°C(55 °F-81°F) by pressing the /\ orV
button until the corresponding value is displayed.
• Select the required fan speed by pressing the
button.
Three speeds are available:
Maximum speed: for maximum fan power
Medium speed: reduces noise levels but still maintains a good level of comfort
Low speed: for silent operation
• Water is removed from the air and collected in the tank.
When the tank is full, the appliance shuts down and ”
” (full tank) appears
on the display. The tank cap must be extracted and emptied. Run off all
water left into a basin. When all the water has been drained, put the cap
back in place.
• When the tank has been emptied, the appliance starts up again.
4
54

Other manuals for Qlima PH534

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Qlima PH534 and is the answer not in the manual?

Qlima PH534 Specifications

General IconGeneral
TypeMonobloc mobile air conditioner
Noise level65 dB
Compressor typeRotary
Airflow (high speed)330 m³/h
Refrigerating mediumR290
Adjustable thermostatYes
Cooling capacity (max)- BTU/h
Dehumidifying capacity4.5 l/h
Air conditioner functionsCooling, Dehumidifying, Heating
Refrigerating medium weight260 g
Suitable for room volume up to105 m³
Cooling capacity in watts (max)3200 W
Heating capacity in watts (max)2900 W
Heating capacity in watts (nominal)- W
Cooling energy efficiency (EER, W/W)2.6
Heating energy efficiency (COP, W/W)2700
Current8.4 A
AC input voltage220-240 V
AC input frequency50 Hz
Energy efficiency class (cooling)A
Energy efficiency class (heating)A+
Annual energy consumption (cooling)- kWh
Hourly energy consumption (cooling)1.2 kWh
Hourly energy consumption (heating)1 kWh
Product colorWhite
Weight and Dimensions IconWeight and Dimensions
Depth350 mm
Width435 mm
Height715 mm
Weight31000 g

Related product manuals