52 53
EN
Technical data
Dimensions
Body with front cover: 450 x 450 x 22 mm
Wall bracket: 240 x 240 x 25 mm
Acrylic glass supports
for freestanding setup 120 x 30 x 30 mm
USB plug
Input: 110 V − 240 V ~ 50/60 Hz 100 mA
Output: 5 V 800 mA
QLOCKTWO CLASSIC
Input: 5 V 550 mA
Operating current: 2-3 Watt
Warranty
The QLOCKTWO CLASSIC warranty period is two years. If damage is caused because the instructions in
this manual were not followed, the warranty is void. Furthermore, the warranty will expire if the QLOCKTWO
CLASSIC is altered, opened or modifi ed. B&F Manufacture GmbH & Co. KG is not liable for any damage to
property or personal injury caused by not observing the instructions for use, improper handling or incorrect
placement or mounting of the clock.
Repairs
Maintenance, adjustment and repair work should only be carried out by an expert or specialist workshop.
Never attempt to repair or dismantle the device yourself. If your QLOCKTWO is damaged or not functioning
properly, please contact a specialist dealer or the manufacturer directly.
WARNING! Never use a damaged QLOCKTWO CLASSIC!
Cleaning & care
QOLOR front cover
Clean the front cover only with the supplied microfi bre cleaning cloth.
In case of persistent stains use a special cleaner for acrylic glass or water with some dishwashing detergent.
Stainless steel front cover, brushed or coated
During installation, make sure you wear the supplied cotton gloves!
Remove the front cover from the body for cleaning to avoid damaging the diffuser layer behind it.
Please use a special stainless steel cleanser to clean the front cover made of brushed stainless steel.
We recommend using only water to clean the front covers made of coated stainless steel.
WARNING! Do not use any cleaning agents containing solvents or alcohol like spirit!
To Next Page
Loading...
Need help?
General
