QNAP TL-D800C User Manual

1. Preface
About This Guide
This guide provides information on the QNAP TL-D800C JBOD enclosure and step-by-step instructions on
installing the hardware. It also provides instructions on basic operations and troubleshooting information.
Audience
This document is intended for consumers and storage administrators. This guide assumes that the user has
a basic understanding of storage and backup concepts.
Document Conventions
Symbol Description
Notes provide default configuration settings and other supplementary
information.
Important notes provide information on required configuration settings and other
critical information.
Tips provide recommendations or alternative methods of performing tasks or
configuring settings.
Warnings provide information that, when ignored, may result in potential loss,
injury, or even death.
TL-D800C User Guide
Preface 2

QNAP TL-D800C Specifications

General

Hot-swap	Yes
Storage drive size	2.5/3.5 \
Total installed storage capacity	0 TB
Number of storage drives supported	8
Supported storage drive interfaces	Serial ATA II, Serial ATA III
Noise level	26.2 dB
Country of origin	Taiwan
Data transfer rate	6 Gbit/s
Fan diameter	120 mm
Product type	HDD/SSD enclosure
Product color	Black, Grey
LED indicators	Fan fail, HDD, Link
Number of fans	2 fan(s)
USB version	3.2 Gen 2 (3.1 Gen 2)
USB connector type	USB Type-C
USB ports quantity	1
USB connector gender	Female
Cables included	USB Type-C to USB Type-A
Number of keys included	2 pc(s)
Power source type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84733080

Weight and Dimensions

Depth	281.4 mm
Width	329.3 mm
Height	188.2 mm
Weight	6180 g
Package weight	7540 g