EasyManuals Logo
Home>QNAP>Storage>TS-128A

QNAP TS-128A User Manual

QNAP TS-128A
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
LED Status Description
Drive Flashes red The data is being accessed and a read/write error occurs
during the process.
Red A drive read/write error occured.
Flashes green The data is being accessed.
Green The drive can be accessed.
USB Flashes blue every 0.5 sec A USB device (connected to the front USB port) is
detected.
A USB device (connected to the front USB port) is
being removed from the NAS.
A USB device (connected to the front USB port of the
NAS) is being accessed.
Data is being copied to or from a USB or eSATA
device.
Blue A USB device is detected in the front USB port.
Off No USB device is detected.
The NAS has finished copying data to or from the USB
device connected to the front USB port.
Beep Alarm
Duration Frequency Description
Short beep (0.5 seconds) 1 The NAS is starting up.
The NAS is shutting down (software shutdown).
The user pressed the Reset button.
The operating system was updated.
3 The user tried to copy the NAS data to the external
storage device from the front USB port, but the data
cannot be copied.
Long beep (1.5 seconds) 3 (every 5 minutes) The system fan is not functioning.
2 The disk volume is about to reach its full
capacity.
The disk volume has reached its full capacity.
The drives are in degraded mode.
The user started the drive rebuilding process.
A drive is plugged in or out.
1 The NAS was powered off by force shutdown
(hardware shutdown).
The NAS was powered on successfully and is
ready.
TS-x28A User Guide
Basic Operations 17

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP TS-128A and is the answer not in the manual?

QNAP TS-128A Specifications

General IconGeneral
Bad block scanYes
Storage drive size- \
Storage drive capacity0 GB
Supported file systemsFAT32, HFS+, NTFS, ext3, ext4
Storage drive interface-
Storage drives installedNo
Storage drive sizes supported3.5 \
Supported storage drive typesHDD
Total installed storage capacity0 TB
Number of storage drives installed0
Number of storage drives supported1
Supported storage drive interfacesSerial ATA, Serial ATA II, Serial ATA III
Processor cores4
Processor familyRealtek
Processor frequency1.4 GHz
Processor architectureARM Cortex-A53
Flash memory4000 MB
Internal memory1 GB
Internal memory typeDDR4
Ethernet LAN data rates1000 Mbit/s
USB 2.0 ports quantity2
Chassis typeMini Tower
Cooling typeActive
Fan diameter40 mm
Product colorWhite
LED indicatorsNetwork, Status, System
Number of fans1 fan(s)
TypeNAS
Device classHome & Home Office
Backup featuresCloud, iSCSI LUN
Browser supportedApple Safari 7, Google Chrome, Microsoft Internet Explorer 10, Mozilla Firefox
Security algorithms256-bit AES, FIPS 140-2, HTTPS, SNMP, SSH
Operating system version4.3.4
Operating system installedQNAP Turbo System
Mac operating systems supportedMac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Server operating systems supportedWindows Server 2003 x64, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016
Windows operating systems supportedWindows 10, Windows 7, Windows 8
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power supply locationExternal
Power consumption (typical)7.06 W
Power consumption (HDD standby)2.9 W
Power supply unit (PSU) capacity36 W
Cables includedAC, LAN (RJ-45)
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth125 mm
Width60 mm
Height187.7 mm
Weight560 g
Package weight1740 g

Related product manuals