5 / 16
1.8 Safety Instructions for Power Cables and Accessories
Proper power source only
Start only with power source that satisfies voltage label and the voltage
necessary according to this manual. Please contact technical support personnel
of Qolsys for any uncertainty about the requirements of necessary power
source.
Power adapter Spec.
Model: SW-070100AB
INPUT: 100-240V~50/60Hz 0.3A Max
OUTPUT: DC 7.0V,1000mA
MADE IN CHINA BY SURE-POWER
CAUTION
Risk of explosion if battery is replaced by an incorrect type
Dispose of used batteries according to the instructions
Place cables properly:
Do not place cables at any place with extrusion danger.
Cleaning Instructions
Please power off before cleaning the device.
Do not use spray detergent.
Clean with a damp cloth.
Do not try cleaning exposed electronic components unless with a dust
collector.
Support for special fault: Power off and contact technical support
personnel of Qolsys in case of the following faults:
The device is damaged.
The temperature is excessively high.
Fault is still not solved after the operation according to the manual.
To Next Page
Loading...
Need help?
General