Quantum Scalar i500 Replacement Guide

Quantum Scalar i500: FC I/O Fan Blade Replacement
6-68064-01 Rev A
December 2013
4 Replacing an FC I/O Fan Blade
3 Carefully align the FC I/O fan blade with the guide slots in the bay. The
status LED must be at the bottom (see
Figure 2).
Caution: Forcing the blade into the bay can cause the pins to bend.
4 Evenly apply pressure to both ends of the FC I/O fan blade and slide it into
the expansion module until the latch hooks begin to move toward the
middle of the blade. As you push in on the blade, you will feel the blade pins
connect with the expansion module’s backplane.
5 Push the latch hooks into the locked position.

Quantum Scalar i500 Specifications

General

Brand	Quantum
Model	Scalar i500
Category	Storage
Language	English