Quantum Superloader 3 Quick Start Guide

Rack Mounting the Autoloader 11
SuperLoader 3
Figure 7 Connecting Support
Brackets
7 Verify that the autoloader is level. Adjust as needed.
8 When the autoloader is level, tighten all screws securing the autoloader to the rack.
This includes the following:
• Four screws securing the autoloader tabs to the front rails.
• Four screws securing the support brackets to the rear rails.
• Four screws securing the autoloader brackets to the support brackets.
Screws
Support bracket
Autoloader bracket

Quantum Superloader 3 Specifications

General

Brand	Quantum
Model	Superloader 3
Category	Storage
Language	English