Do you have a question about the Quectel GNSS Series and is the answer not in the manual?
Brand | Quectel |
---|---|
Model | GNSS Series |
Category | Control Unit |
Language | English |
Details changes made to the document over time.
Important safety precautions for operating the module.
Illustrates the top view of the L26-LB EVB, identifying key components.
Lists and illustrates the components included in the L26-LB EVB kit.
Shows how to assemble the L26-LB EVB with its accessories.
Details the micro USB interface for power supply and data communication.
Explains the UART interface for data communication, including pin definitions.
Describes the antenna interface for receiving satellite signals.
Illustrates and describes the switches and buttons on the EVB.
Explains the function of the operation status indication LEDs.
Illustrates the test points available on the EVB.
Guides on establishing communication via the micro USB interface using QCOM.
Provides steps for upgrading the module's firmware using FlashTool.
Details how to configure COM port and baud rate settings in PowerGPS.
Explains the icons and information displayed on the PowerGPS interface.
Describes how to send PMTK commands using PowerGPS for module control.
Guides on performing automatic Time to First Fix (TTFF) testing with PowerGPS.