Quectel LC79D User Manual

GNSS Module Series
LC79D Hardware Design
LC79D_Hardware_Design 33 / 42
6 Mechanical Dimensions
This chapter describes the mechanical dimensions of the module. All dimensions are measured in
millimeter (mm), and the dimensional tolerances are ±0.05mm unless otherwise specified.
6.1. Mechanical Dimensions of the Module
10.10±0.15
9.70±0.15
8.80±0.10
9.35±0.10
1.00±0.10
2.40±0.20
Figure 12: Top and Side Dimensions

Quectel LC79D Specifications

General

Brand	Quectel
Model	LC79D
Category	Control Unit
Language	English