Quectel SC200R Series User Manual

Smart Module Series
SC200R&SC262R_Series_Hardware_Design 59 / 124
3.14. I2C Interfaces
SC200R series module provides four I2C interfaces. All I2C interfaces are open drain signals and
therefore you must pull them up externally. The reference power domain is 1.8 V. The SENSOR_I2C
interface only supports sensors of ADSP architecture. CAM_I2C and DCAM_I2C signals are controlled by
Linux Kernel code and support connection with devices related to video output.
Table 19: Pin Definition of I2C Interfaces
3.15. SPI Interfaces
SC200R series module provides three SPI interfaces, which are multiplexed from UART and GPIO
interfaces. These interfaces can only support master mode and can be used for fingerprint recognition.
Table 20: Pin Definition of SPI Interfaces
Pin Name
Pin No.
I/O
Description
Comment
TP_I2C_SCL
47
OD
TP I2C clock
Used for touch panel
TP_I2C_SDA
48
OD
TP I2C data
CAM_I2C_SCL
83
OD
I2C clock of camera
Used for camera
CAM_I2C_SDA
84
OD
I2C data of camera
DCAM_I2C_SCL
166
OD
I2C clock of camera
Used for camera
DCAM_I2C_SDA
205
OD
I2C data of camera
SENSOR_I2C_SCL
91
OD
I2C clock of external sensor
Used for external
sensor
SENSOR_I2C_SDA
92
OD
I2C data of external sensor
Pin Name
Pin No.
I/O
Description
Comment
UART5_RXD
35
DI
SPI5 data input
Can be multiplexed into SPI5_MISO
UART5_TXD
34
DO
SPI5 data output
Can be multiplexed into SPI5_MOSI
UART5_RTS
37
DO
SPI5 clock
Can be multiplexed into SPI5_CLK

Quectel SC200R Series Specifications

General

Brand	Quectel
Model	SC200R Series
Category	Control Unit
Language	English