Quectel SC200R Series User Manual

Smart Module Series
SC200R&SC262R_Series_Hardware_Design 91 / 124
It is recommended to use a passive GNSS antenna when LTE B13 or B14 is supported, as the use of
active antenna may generate harmonics which will affect the GNSS performance.
6.5.2. Recommended RF Connector for Antenna Installation
If you use an RF connector for antenna connection, it is recommended to use the U.FL-R-SMT connector
provided by HIROSE.
Figure 37: Dimensions of the U.FL-R-SMT Connector (Unit: mm)
NOTE

Quectel SC200R Series Specifications

General

Brand	Quectel
Model	SC200R Series
Category	Control Unit
Language	English