Before the Trike is Used
Each trike requires setting up when it has been delivered.
A combination tool is supplied with the trike in order for this to be
done. Look after this tool and keep all the parts with it. The spanners
slide out of the tool and the allan keys and screwdriver fold out. The
8mm allan key adapter is stored between the allan keys when the
tool is not in use. To use the 8mm allan key, t it onto the 6mm allan
key which is part of the tool.
The ends of the spanners can be used as tyre levers. However, they
are not suitable for Quest 88 trike wheels. Use plastic tyre levers
when xing punctures on Quest 88 trikes.
A pump is also supplied with the trike. Keep the tyres inated as per
these instructions. Keeping the tyres rm will keep the trike stable
and help prevent punctures.
Setting Up to Get Going
It is essential that time and consideration is taken whilst setting the
trike up to ensure safe and easy use.
The best benets of using the trike will come through careful and
accurate setting up, which will ensure a positive and active posture.
QD. TRINST1supp.PM6 iss.8/GJ-06/09
2
Quest 88 limited,
Aston Street, Shifnal, Shropshire, TF11 8DW
tel: +44 (0)1952 463050 fax: +44 (0)1952 463077 www.quest88.com email:general@quest88.com
all sizes given in centimetres (cm)
*trike weight will vary with accessories.
**inside leg measurement when leg is slightly exed. NB: When refering to the trike, left and right hand always denotes left and right
when sitting on the trike.
a
100 120 145
b
66 72 83
c
70-78 85-100 100-115
max user
weight
25kg 45kg 65kg
trike
weight*
25kg 28kg 35kg
user leg
length**
33-48 38-58 56-75
Dimensions
The trikes come in three sizes, as
detailed below.
To Next Page
Loading...
General