1-866-933-7486
Quest PowerDry 1300 Installation, Operation and Maintenance Instructions
10
www.QuestOnTheJob.com
sales@QuestOnTheJob.com
quest
quest
Quest PowerDry 1300 Installation, Operation and Maintenance Instructions
The internal condensate pump removes water that collects in the reservoir.
To replace the condensate pump:
1. Unplug the unit
2. Remove the front housing
3. Unplug the pump wires from the wire harness
4. Remove the condensate hose and the one screw attaching the pump bracket to the rear housing
5. Replace the pump, hose, wiring, bolts, and housing in the reverse order
7 Options & Accessories
4026315 Air Filter, Pleated 12” x 12” x 1” MERV-8
4025568 Air Filter, Pleated 12” x 12” x 1” MERV-11
4024935 Lay-Flat Duct 10” Round x 250’ Roll
To order, contact Therma-Stor LLC at 1-866-933-7486.
To Next Page
Loading...
Need help?
General
