88688A23
DUAL HANDLE TRIM
CONTROL
INSTALLATION,
OPERATION AND
MAINTENANCE
INSTRUCTIONS
NOTICE to INSTALLER
After Completing Installation, These Instruc-
tions Should Be Placed with the Product For
the Owner’s Future Use.
ACAUTION
Do not use external tie bar with this dual handle trim
control or damage to drive units may result if improp-
erly trimmed.
Index
Page
Notice to Installer/Owner
........................
Maintenance and Replacement Parts
.............
Selecting Remote Control Cables
................
Introduction
....................................
Installation
....................................
Starboard Side Control Module Cable Installation
All MerCruiser Models (Except MIE) and Out-
board Models (250 HP 3 Litre and Below)
.......
Shift Cable
.................................
Throttle Cable
..............................
Port Side Control Module Cable Installation
All MerCruiser Models (Except MIE) and Out-
board Models (250 HP 3 Litre and Below)
.......
Shift Cable
.................................
Throttle Cable
..............................
Starboard Side Control Module Cable Installation
Outboard Models 250 HP 3.4 Litre and Above
...
Shift Cable
.................................
Throttle Cable
..............................
Port Side Control Module Cable Installation
Outboard Models 250 HP 3.4 Litre and Above
...
Shift Cable
.................................
Throttle Cable
..............................
Remote Control Mounting
.......................
Locating and Drilling Mounting Area
..............
Mounting Control
...............................
Trailer Switch Installation
........................
Neutral Safety Switch and Power Trim
Connections
.................................
Repositioning Control Handles
...................
Operation
.....................................
4
4
4
5
5
5
6
6
6
7
7
7
8
8
8
10
10
11
13
Printed
in U.S.A.
-1-
90
-812625
l-395
To Next Page
Need help?
General
