11
TEMPERATURE
• The settings you choose in this section
will change what temperature the fan will
come on at each set speed.
• Tap on any speed to adjust the
temperature for each speed.
HUMIDITY
• Turn Fan Off: This is the humidity
percentage that will cause the fan to
turn off. For example, the factory setting
is set at 90%, meaning the fan will turn
off if the humidity in the attic is 90% or
higher. Tap this setting if you would like
to adjust the percentage. If you do not
want this feature, you can select OFF at
the top of the list.
• Turn Fan On: This is the humidity
percentage that will cause the fan to
turn on, regardless if the temperature
settings are not met. For example, the
factory setting is set at 70%, meaning
the fan will turn on if the humidity in
the attic is higher than 70%, even if the
temperature in the attic is below the
temperature settings in the app. If you
do not want this feature, you can select
OFF at the top of the list.
• Desired Speed: This is the speed the
fan will use if the humidity causes the fan
to turn on.
These settings will be saved into the memory of
the Hub meaning all settings will sync between
any additional devices you pair to the Hub.
Click Done to complete Fan Setup. You can
always access these settings again from the
Settings option on the Fan Control Page.
WELCOME
INSTALLATION
WIRING OPERATION
WARRANTY
To Next Page
Loading...
Need help?
General
