Radial Engineering HEADLIGHT User Manual

9VDC
Made in Canada
INPUT
TUNER
OUT-2 OUT-1
OUT-4 OUT-3
MUTE
TM
HEADLIGHT
LIFT
GND POL
180º
OUT 4 OUT 3 OUT 2 OUT 1
DRAG
MUTE
ALL ON
OUT 3-4 OUT 1-2 IN / TUNER
LIFT
GND POL
180º
LIFT
GND POL
180º
SELECT
MUTE
MIN MAX
9VDC
Radial Engineering Ltd. Headlight™ User Guide
2
FEATURES
1. INPUT: ¼” input used to connect a
guitar or bass to the Headlight.
2. TUNER: Dedicated separately
buffered ¼” output is always-on,
connects to tuner.
3. OUTPUT-1: Default output and
should always be used as it
provides a safe ground path to the
instrument.
4. OUTPUT-2, 3 & 4: Isolated ¼”
outputs used to send signal to
different amps or effects.
5. 9VDC: Power jack for typical 9V
supply or pedalboard power brick
(not included).
6. CLAMP: Ties down the power
supply to eliminate accidental
disconnection.
1 3 6
2 4 5

Radial Engineering HEADLIGHT Specifications

General

Brand	Radial Engineering
Model	HEADLIGHT
Category	Amplifier
Language	English