Radial Engineering JDI User Manual

Part 8 – Block diagram and specications
Radial Engineering JDI
™
User Guide
15
JDI Specications
Type: Passive Jensen Transformer equipped
Input impedance: Unbalanced 140k Ohms typical
Output impedance: Balanced 150 Ohms typical
Frequency response: 20Hz to 20kHz (+/- 0.2dB)
Linear performance: < -0.22 dBr deviation @20kHz
Total harmonic distortion: 0.05% @ 20Hz, 0.006% @ 1kHz
Phase distortion: 3º at 20Hz, 0.3º at 100Hz
Maximum input level: +21dBu @ 20Hz (1% THD)
Size: 3.5" wide, 2" high, 5.5" deep
Weight: 1kg / 2.2lbs
Construction: Welded 14-gauge steel
Finish: Baked enamel nish
JDI Block Diagram
True to the Music

Radial Engineering JDI Specifications

General

Brand	Radial Engineering
Model	JDI
Category	Recording Equipment
Language	English