Radial Engineering JDX 48 User Manual

JDX 48 Amp Direct Box
Radial Engineering Ltd.
3
FROM AMP connection
for amplier output.
300W AMP select for use with
higher wattage amps.
TO SPEAKER connects your amp to the
speaker through the JDX 48. Connec-
tion to a loudspeaker or a load box
is mandatory. Please read the safety
disclosure statement before connecting
the JDX 48.
GROUND LIFT switch
eliminates hum and buzz
caused by ground loops.
PSU JACK optional con-
nection for the included 15
volt DC power supply.
BASS EXT Boosts bottom
end frequencies for bass.
XLR OUTPUT mic-level,
600Ω balanced XLR out-
put connects to your mix-
ing console.
180° POLARITY Reverses
pin-2 and pin-3 at the XLR
output to phase align the
JDX 48 with a mic.
BOOKEND DESIGN
creates a protective zone
around the jacks switches.
CABLE CLAMP
Secures cable in
place.
FULL BOTTOM PAD keeps it from
sliding around and provides isolation
from electried amplier frames and
handles.
FEATURE SET

Radial Engineering JDX 48 Specifications

General

Brand	Radial Engineering
Model	JDX 48
Category	Amplifier
Language	English