Radio Shack 4-in-One Smart Light-Up Remote Control User Manual

12
FAVORITE CHANNEL SCAN
You can use your remote control to scan
through up to 10 of your favorite channels on
your TV, VCR, or cable box.
Note:
You can scan channels only for one de-
vice (TV, VCR, cable converter) at a time. You
cannot set up a favorite channel list for another
device until you clear the existing list.
1. Press the device key for the device with
the channels you want to program (
TV
,
VCR
, or
CBL
). The red light blinks.
2. Hold down
P
until the red light blinks twice,
then press
9 9 6
.
3. Enter the channel number of the first chan-
nel you want to include in your favorite
channel list. Then press
P
.
Notes:
• Precede a single-digit number with a 0
(for example, 01, 02, and so on).
• If you enter a three-digit number, you do
not need to press
P
after entering the
number.
• If your TV requires an ENTER key when
entering a channel number, press
ENTER
after you enter the channel num-
ber.
4. Repeat Step 3 for other channels (up to
10) you want to include in your list. Then
hold down
P
until the red light blinks twice.
5. To scan through the favorite channel list,
press the device key for the device you
want to tune (
TV
,
VCR
, or
CBL
), then press
SCAN
. The remote control repeatedly
scans through the favorite channel list,
15-1993.fm Page 12 Wednesday, October 20, 1999 12:03 PM

Radio Shack 4-in-One Smart Light-Up Remote Control Specifications

General

Brand	Radio Shack
Model	4-in-One Smart Light-Up Remote Control
Category	Universal Remote
Language	English