Battery charged. Regular scale operation.
Pictogram displayed continuously
Too low battery charge (the scale is about to shut
down). Charge the battery immediately.
Blinking pictogram, blink frequency:
ca. 1 s
Battery charge in progress. The device is connected
to the power supply charging the battery.
Blinking pictogram, blink frequency:
ca. 0.5 s
Battery error. Battery is damaged.
7.7. Battery Charge Status Check
Press and keys combination.
Depending on the battery state, a respective status is displayed on the
screen for 2s:
Battery power supply. Battery power given in %.
Battery charge in progress. The device is connected to the power supply
charging the battery.
Battery error. Battery is damaged.
Next, the home screen is displayed automatically.
8. OPERATING THE MENU
In order to navigate the program menu use the operation panel.
Press to enter the main menu.
Press to enter tare manually.
Press to enter tare from tare database.
Press to change value by 1 digit up.
Press to scroll the menu up.
Press to check battery/accumulator state.
Press to scroll the menu down.
Press to change current parameter value.
Press to enter given submenu.
Press to modify given parameter.
To Next Page
Loading...
Need help?
General
