User Guide 27
Subsequent presses of mode will cycle through the various calibration
options.
Hardware and Software version numbers
Use this screen to display the version and serial numbers for the unit.
Contrast
Use the < and > keys to adjust the contrast to a satisfactory level.
Self test
Press PILOT to start the unit test sequence and then follow the on-screen
instructions. This will test the display, buzzer and button functions.
Diagnostics
Press PILOT to display the status of the wireless link.
Handset Registration
Raymarine wireless systems demand that each wireless controller is
“registered” to a basestation. This registration process is to prevent
unauthorized control of your boat by another user nearby. Your S100 system
is supplied with the handset pre-registered to the basestation.
There may be instances where you want to move your controller to another
boat and use it with another system. In this case, you will need to de-register
from the current system and register with the new system. You can do this
using the REGISTRATION function.
To Next Page
Loading...
Need help?
General
