Razor E Prime III User Manual

OPTION 2
OPTION 1
HEADLIN E
Need Help? Visit our website for product support, a list of authorized service centers in the US and customer service contact information at www.razor.com.
Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service contact information is
listed at the back of this manual.
8
USAGE
8
How to Ride
Do not activate the thumb throttle unless you are on the E Prime III and in a safe, outdoor environment suitable for
riding.
Put kickstand up.
Press the power button (A), the LEDs on the battery display will light up.
Headlight and Taillight: To activate the headlight and taillight the product must be powered ON. Press the light
button (B) once to activate the headlight and taillight. To deactivate the headlight and taillight, press the light button
once again.
Get on the scooter and place both hands on the handlebars. Kick to start (C), and then press down on the thumb
throttle (D).
A
D
Note: Electric scooter must be
moving at least 3 mph (5 km/h)
while engaging throttle to
engage motor.
How to Stop
For controlled stops, apply the brake by pressure on the rear-fender brake or electronic brake (on handlebar).
Razor recommends that you practice applying the brake options at various speeds and in an open area free from
obstructions before riding your scooter around others.
When the brake is applied the tail/brake light will glow brighter. The brake light is always functional and independent
of the other lights being activated.
Option 1 - Press the electronic brake (on handlebar), the power will cut off and then product will slow to a stop.
Option 2 - Step on the rear-fender brake, the power will cut off and then product will slow to a stop.
C
B
WARNING:
The brake is capable of skidding
the rear tire and throwing an
unsuspecting rider. Practice in an
open area free from obstacles until
you are familiar with the brake
function. Avoid skidding to a stop as
this can cause you to lose control
and/or damage the rear tire.
Note: As an additional safety
feature, the scooter is designed to
cut power to the motor when either
brake option is applied.
Note: Motor will re-engage,
(without having to kick to start),
if brake is released and throttle is
applied before scooter has slowed
down to under 3 mph (5 km/h).
Note: Practice riding only in wide
open areas clear from curbs,
parking blocks and other obstacles.
Impacting the wheels against
any hard surface can damage the
wheels. Wheels are not covered
under the limited warranty.

Razor E Prime III Specifications

General

Brand	Razor
Model	E Prime III
Category	Scooter
Language	English