Razor E90 User Manual

11-5
11-3
11-4
11-3
11-2
11-1
11-2
22-1
22-2
22-4
22-5
22-2
22-1
22-3
22-3
5
REPAIR AND MAINTENANCE
q Chain and Rear Wheel Replacement
Tools required: Phillips screwdriver and two (2) 13 mm wrenches.
1 With a Phillips screwdriver,
loosen the two (2) screws and
remove the chain guard.
2 Using two (2) 13 mm wrenches,
loosen the locknuts by turning the
wrenches counter clockwise.
3 To loosen the chain, push the
chain tensioner down to create
some slack in the chain.
4 Remove wheel and install
replacement wheel. (Note the
sequence of the hardware.)
5 Push the chain tensioner
down to install the chain on both
sprockets.
6 With two 13 mm wrenches,
retighten the locknuts.
Note:
Rear wheel hardware
sequence
Left Side
22-1 13 mm nut
22-2 Split washer
22-3 Flat washer
Frame
22-4 Long spacer
Right Side
22-1 13 mm nut
22-2 Split washer
22-3 Flat washer
Frame
22-5 Short spacer
7 Reattach the chain guard.
1 Using two (2) 5 mm Allen
wrenches, loosen the axle bolt.
Remove wheel and install replace-
ment wheel. (Note the sequence of
the hardware)
q Front Wheel Replacement
Tools required: Two (2) 5 mm Allen wrenches.
Right Side
11-4 - Center spacer
11-3 - Bearing
11-2 - Spacer
Fork
11-1 - 5 mm coupling bolt
Left Side
11-3 - Bearing
11-2 - Spacer
Fork
11-5 - 5 mm coupling bolt
Note: Front wheel hardware
sequence

Razor E90 Specifications

General

Foldable	No
Wheels type	Solid wheels
Maximum speed	14.5 km/h
Product color	Orange, White
Built-in display	-
Maximum load weight	100 kg
Recommended age (min)	8 yr(s)
Battery life	50 min
Battery voltage	12 V
AC adapter included	Yes

Weight and Dimensions

Depth	780 mm
Width	350 mm
Height	830 mm
Weight	9800 g