Remove contents from box and check parts against part diagram below. Remove the foam separators that protect the components from damage during shipping.
Inspect the contents of the box for scratches in the paint or dents that may have occurred during shipping. Because the Kiddie Kick was partially assembled and
packed at the factory
, there should not be any problems, even if the box has a few scars or dents.
❑ Estimated Assembly and Set-Up Time
Adult assembly required.
Allow up to 5–10 minutes for assembly.
BEFORE YOU BEGIN
2
No Tools Required.
WARNING: Keep fingers clear of the pivoting mechanism when folding or unfolding the Kiddie Kick. Do not allow children to
fold or unfold this product.
T-Bar
“E” Shaped Fixed Pin
Steering Clamp Cover
Front Fork Assembly
Need Help? Visit our web site for replacement parts, product support, live chat and a list of
authorized service centers at www.razor.com or call toll-free at 866-467-2967 Monday - Friday
8
:00 AM - 5:00 PM Pacific Time.
Folding Release Lever
To Next Page
Loading...
Need help?
General
