SET-UP AND USAGE
3
1 Pull up the folding release lever to raise
the front fork into the upright position.
2 Remove the “E” shaped fixed pin from
the front fork assembly.
3 Slide the steering clamp cover onto the
T-bar.
4 Insert the T-bar into the front fork
assembly using your thumb to depress the
button on the T
-Bar until it “locks” into
place.
5 Insert the “E” shaped fixed pin into the
open hole on the front fork assembly to
secure T
-bar.
6 Slide the steering clamp cover down and
over the “E” shape fixed pin.