Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
Remove contents from box. Inspect the contents of the box for scratches in the paint and/or dents that may have
occurred during shipping. Because your scooter was partially assembled and packed at the factory, there should not be
any problems, even if the box has a few scars or dents.
BEFORE YOU BEGIN
WARNING: Razor
scooters have been built to certain
Razor design specifications. The
original equipment supplied at the
time of sale was selected on the
basis of its compatibility with the
frame, fork and all other parts.
Certain aftermarket products may
not be compatible and will void
your warranty.
Required Tools
4 mm
Allen Wrench
(Ultra Pro Only)
5 mm
Allen Wrench
Grips
T-bar
Deck
T Style Handlebar
Y style handlebars (selected models)
Downtube
Rear Fender/Brake
Collar Clamp
Fork Headset Locknut
Front Fork
Wheels
Product ID Locations:
1. Side of Deck Plate
2. Box - Side of UPC (not shown)
Box Contents:
• Scooter
• Allen Wrench
• Owner’s Manual
To Next Page
Loading...
Need help?
General