15
Phone Setting
1. Make sure your phone is OFF (not in Talk mode).
2. Press the Menu button on HS or the MENU soft key (left) on BS to go
to the main menu.
3. Press VOL (+ or -) button to scroll to Phone Setting.
4. Press SELECT soft key (right) to confirm and you may program the
following items:
Date/Time (base only),
Auto Answer (handset only),
Auto Answer Intercom (both base and handset),
Dial Mode (base only),
Area Code (base only),
Registration (handset only),
De-Registration (base only),
2nd Call Alert (both base and handset),
Handset Name (handset only),
Update HS List (base only).
Date/Time
Add Headset (base only)
From the Phone Setting Menu:
1. Press the VOL (+ or -) button to scroll to Date/Time.
2. Press SELECT Soft key.
3. LCD will display last-set time (or, if the device is new or has been reset to
default, the LCD will display 12:00AM 01/01/10)
4. Use the dial-pad to enter digits for the current time and date.
NOTE: Use DIR/CID button to move the cursor and the AM/PM softkey to
set the time AM or PM.
5. Press SAVE softkey to confirm the setting, a confirmation tone will
indicate that your selection has been saved.
.
NOTE: The Date/Time setting item only exists in base menu, handset Date/
Time should update automatically after it is set in the base.
Programming the Telephone
To Next Page
Loading...
Need help?
General
