Restore Setting
2. Press SELECT Soft key
3. Use the
The feature allows you to reset some menu settings to the original default
settings.
1. Press Menu button on handset or MENU soft key on the base.
2. Press the VOL (- or +) button to scroll to Restore Setting.
3. Press SELECT soft key. “LOAD TO DEFAULT?” displays on the screen.
4. Press YES soft key to let unit reset to default setting; once finished, the
unit will emit a short beep prompt, and after the base shows " please wait
..." in the display for about 3 seconds. then reset the unit automatically.
5. If you do not want to reset, press the NO soft key.
VOL (- or +) button to toggle between Line 1 and Line 2 and
press SELECT soft key to select.
4. Use the dial pad to enter the call-in access number for your voicemail.
Press Delete button to backspace and delete numbers, if necessary.
5. Press SAVE Soft key.
6. A confirmation tone will indicate that your selection has been saved.
Telephone Operation
Making Calls with the Cordless Handset
1. Press the Talk button, the unit will pick the first available line for you.
-OR-
Press Line 1 or Line 2 soft key to select a line you wanted.
2. Wait for a dial tone then dial the phone number.
3. Press the End button when finished.
Press the Line1 or Line2 Softkey to select a specific line. The Handset
will activate the ear piece. Then press the SPK button to switch to the
speakerphone mode.
2.
3.
a wired
To Next Page
Loading...
Need help?
General
