VGA
Audio-In
PC INPUT
VGA
Speaker or
headphone
Side Panel Connections
Connecting a computer
To connect a computer, follow these steps:
1. Connect the PC INPUT VGA port on the side of TV to the VGA output jack of device via D-sub 15-pin cable.
2. Connect the PC INPUT Audio In jack on the side of TV to the audio output jack of computer with audio cable (3.5mm).
PC Connection
The picture below is an example of a connection using your TV as a PC monitor.
How to Obtain Various Kinds of Input Sources
After connection is done, press INPUT button on remote control or TV top panel to choose the input source you need.
See page 19, Basic Operation of TV.
Note: If you want to use your TV as a monitor, please notice that the maxium resolution for 30LA30RQ is 1366*768.
Please set the computer graghic correctly.
13
PC
The back of TV
To Next Page
Loading...
Need help?
General
