56
1. If the strap keeper is
over a double section
of the strap, slide the
strap keeper off the
end of the strap.
Replace the keeper
on the strap between
the buckle and the
end of the strap as
shown.
2. Loop the end of the strap over the top
of the shoulder strap attachment ring.
3. Thread the end of the strap back
through the keeper and buckle. Make
sure the strap is not twisted.
Recording
Attaching the Shoulder Strap
The camcorder’s shoulder strap is designed to let you carry the camcorder from your
shoulder and – when you are ready to shoot – bring the camcorder to shooting position
in one quick movement.
Cautions: When carrying the
camcorder with the shoulder strap,
you may find it convenient to rotate
the viewfinder down and slide it to
the front. This helps prevent
possible damage to the viewfinder
from bumping against your body as
you move.
Make sure the shoulder strap is
firmly attached before using it to
carry the camcorder.
To Attach the Shoulder Strap
4. Attach the other end of the strap to the
other shoulder strap attachment ring.
5. Adjust the shoulder strap to the desired
length.
6. Slide both keepers up snugly against
the shoulder strap attachment rings to
prevent the strap from slipping.
Keeper
Keeper
Buckle
Attachment
Rings
To Next Page
Loading...
General