EasyManuals Logo
Home>RCA>Camcoder>CC616

RCA CC616 User Manual

RCA CC616
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
66
Optional Accessories
193983 Cable Transformer
This 300-to-75 ohm transformer is used to
connect a standard (300 ohm) antenna
twin-lead to a standard round 75-ohm
connector.
AH011 Cable Transformer
This 75-to-300 ohm transformer is used to
connect a standard 75-ohm antenna cable
(such as AH065G or AH066G) to the
300-ohm screw terminals on a TV.
AH25 Y-Adapter
This Y-adapter allows you to connect
your camcorder’s mono audio cable to a
stereo TV or VCR.
1CVA147C RF Output Adapter
This RF output adapter is used with a
coaxial RF cable, such as AH065G or
AH066G, to connect your camcorder to a
standard TV (one without audio/video
inputs) for playback. If your antenna
cable is the flat twin-lead type attached by
two screws, you will also need a 300-75
ohm transformer such as 193983. If your
TV has 300 ohm VHS screw terminals,
you will need an optional 75-300 ohm
transformer such as AH011.
Coaxial RF Cables
These RF cables are used with the RF
output adapter to connect your camcorder
to a standard TV (one without
audio/video input jacks) for playback. If
your antenna cable is the flat twin-lead
type attached by two screws, you will also
need a 300-75 ohm transformer such as
193983. If your TV has 300 ohm VHS
screw terminals, you will need an optional
75-300 ohm transformer such as AH011.
All specifications and descriptions of
accessories are subject to change
without notice.
AH065G (6-ft)
AH066G (10-ft)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the RCA CC616 and is the answer not in the manual?

RCA CC616 Specifications

General IconGeneral
BrandRCA
ModelCC616
CategoryCamcoder
LanguageEnglish