59
Playback
Use the LCD Monitor or Viewfinder for Playback (continued)
To Play Back a Tape
1. Attach a power supply.
Attach the adapter/charger, charged
battery, or optional car cord.
2. Insert a tape.
• Open the LCD monitor. Open the
monitor at least 60˚ before opening
the cassette compartment.
• Slide EJECT switch to the left to
open the cassette compartment.
• Turn the tape wheel on the cassette
to remove any slack from the tape.
• Insert the cassette with the tape
wheel facing up and the tape
window facing out.
• Press on the PUSH button to lock
the cassette compartment closed.
3. Set the POWER switch to VCR.
The power indicator lights.
4. Use the LCD monitor or viewfinder
to see what you are playing back.
Use the LCD Monitor
• Make sure the monitor is open 60˚.
The viewfinder turns off.
• Rotate the monitor to a comfortable
viewing position (180˚up and
around or 90˚ down).
• Adjust the brightness of the image
by turning the Bright control (also
menu PUSH dial).
• Adjust the speaker volume with the
VOL (volume) control (also zoom
lever).
Use the Viewfinder
• Make sure the monitor is closed
and locked. The viewfinder
turns on.
• Adjust the viewfinder for a
comfortable viewing position.
• Turn the eyepiece focus control to
adjust the focus of the viewfinder
for your vision.
5. Press the PLAY/PAUSE button to
begin playback.
• The
6
indicator appears in the
viewfinder or on the LCD monitor
during playback.
• If necessary, adjust tracking.
• During playback, use the playback
features on the following pages.
6. Press the STOP button when you
are finished.
To Next Page
Loading...
Need help?
General
