10
VIDEO
CAPTION OFF
-
SETUP +
ENGLISH
Operating Features
Sleep Timer Operation
By setting the Sleep Timer, you can
program your TV to turn itself off
after a certain period of time (up to
four hours). This is useful whenever
you want to watch TV for an hour or
so before going to sleep.
Setting the Sleep Timer
4. When the Sleep Timer is turned on, the
letters SLP appear on the screen
whenever you change channels or
stations or press DISPLAY.
5. Repeat step 1 to see the amount of time
remaining before the TV shuts itself off.
6. When the Sleep Timer counts down to
one minute, the Sleep Timer display
appears on the screen. When this
display appears, press CLEAR to cancel
the Sleep Timer if you want the TV to
remain on.
1. Press MENU until SETUP is high-
lighted. Then press + to select the
SETUP menu.
2. Press + to select the length of time you
want the TV to stay on. Each press of
the + button adds 30 minutes. Each
press of the – button subtracts 30
minutes.
3. When finished, the display disappears
from the screen in a few seconds. To
make it disappear more quickly, press
CLEAR on the remote.
ALARM: OFF
CLOCK 1:58PM
(MORE)
– SLEEP 2:00 +
ALARM 12:00AM
ALARM: OFF
CLOCK 10:35PM
(MORE)
– SLEEP :32 +
ALARM 12:00AM
12
10:35PM
SLP
32 minutes
remaining
Cancelling Sleep Timer
Press MENU until SETUP is highlighted.
Then press + to select the SETUP menu.
Press the – button until the screen
shows “-:- -”.
To Next Page
Loading...
Need help?
General
