Chapter 2: The Menu System
9
Graphics contained within this publication are for representation only. Your unit might differ slightly.
List
Chan Scan
# List
059 YES
^
v
Press MENU to exit.
The Channel Menu
The Channel menu contains all the commands used to control your channels, including custom-
building your channel list.
Signal Type Displays a toggle that lets you select the current antenna type:
Antenna Choose this if you are currently using an off-air antenna for UHF/VHF TV signals.
Cable TV Choose this if you are currently using cable or a cable box for TV signals.
Auto Channel Search Selecting this option tells the TV to search automatically for all the channels
available through the antenna input. When the TV finds an active channel, it places it in the channel
list. Inactive channels (weak stations or channels with no signal at all) will be removed from the channel
list. (You may interrupt this process by pressing the MENU button.)
List Displays a control panel that lets you customize your channel scan list by adding or removing
channels. Use the arrow buttons to move between fields and to enter settings. Press MENU to exit.
Channel Number Use the CH +/- or arrow buttons to scroll through the channel scan list.
You can also enter the channel number directly using the number buttons.
Scan List Indicates whether the channel number is included (YES) or is not included (NO)
in the channel scan list.
1 Signal Type: CABLE TV
2 Auto Channel Search
3 List
0 Exit
The Channel menu
Channel
List menu
1558177E.02 3/8/04, 2:20 PM9
To Next Page
Loading...
Need help?
General
