80 Chapter 7
Problem
• Check whether the set is turned on.
• Power cord inserted into wall outlet?
•Test if there is power coming from the wall outlet by plug-
ging in another product into the wall outlet where the
set’s power cord was plugged in.
• This is normal as the image is muted during the start up
process of the set. Please contact your service center, if the
picture has not appeared after five minutes.
• Select color in the Picture menu and press the Left or
Right button.
• Check for local interference such as a nearby electrical
appliance or power tool.
•A change in ambient humidity or temperature may result
in an unusual noise at the time of switching off or on of
the set and does not indicate a fault with the set.
• Ensure, ‘SI Vender Select’ is set to ‘FTG’ for Free to Guest
system types, Or ‘PPV’ for pay per view system.
No picture on screen.
Picture appears slowly, after switch-
ing on.
No or Poor color
Horizontal/Vertical bars or
picture shaking
Unusual sound from inside the
set.
TV won’t display Pro:Idiom
encrypted signals.
Check Point
Troubleshooting
Chapter 7: Other Information
To Next Page
Loading...
Need help?
General
