40
Time Counter With Memory Stop
The time counter shows actual time elapsed when recording or playing back a
tape. It quickly locates the end of recorded segments.
0:00:00M
Time Counter With Memory
Stop Turned On in Viewfinder
To Use Time Counter
For example, you recorded a 10-minute
segment. Later, you want to locate the
end of your recording. Insert the cassette
and fast-forward the tape until the time
counter reads “0:10:00”.
Memory-Stop Feature
The memory-stop feature helps you
locate a certain point on the tape. When
memory stop is turned on, the tape will
stop automatically during rewind or fast
forward when the time counter reaches
“0:00:00M”.
DISPLAY Button
REW Button
CAM/OFF/VCR Switch
F.F Button
STOP Button
1.Press DISPLAY on the remote to turn
on memory stop. An “M” appears
behind the time counter.
Note: During playback or play pause, you
can also press DISPLAY on the camcorder
to turn memory stop on and off.
To Next Page
Loading...
Need help?
General
