EN
EN
Before You Begin
File Download
When the unit is connected to the
computer, “USB Connected” will be
displayed on the screen.
During transfer, “USB Transfer ...” flashes
on the display. When the transfer is
complete, the display will change to "USB
Connected". Do not unplug the USB cable
when the display is flashing.
8
Note
Refer to the “USB Driver
Installation; MusicMatch Jukebox
TM
Software” instruction manual for
procedures in setting up USB drivers
and transferring files to the player
and / or the memory card.
7
Before You Begin
Inserting a SD card /
MultiMediaCard (Optional)
The player has built-in flash memory. To
extend the playtime, you can use the
optional Memory Card slot.
1. Insert a Memory Card into the card slot
on the top of the player when it is off
as illustrated in the diagram below.
2. To remove the card, pull the Memory
Card out when the unit is off.
Connecting the Lyra Player
to your Computer
1. Lift the rubber cover that is covering
the USB socket on the back of the
player.
2. Insert the smaller end of the USB cable
into the socket on the unit tightly.
3. Insert the larger end of the USB cable
to the USB socket on the back of the
computer.
Note
Do not remove the Memory Card
during playback or when the power is
on. This may stop the unit from
playing immediately or damage the
memory on the memory card or the
player.
Note
Secure music download files must be
transferred to your Lyra player
through Windows Media Player or
the application recommended by the
online music download service.
Please visit the online music
download service’s website where
you purchased your content from for
more details on transferring secure
music to your player.
For more information on Windows
Media Player, visit
http://www.microsoft.com/windows/
windowsmedia.
To Next Page
Loading...
Need help?
General
