3
Operating the Radio
Tuning the Stations
1. Plug the power cord into any 120-V AC
household outlet.
2. Press ON/OFF (located on the top of the
unit) to turn on the radio.
3. Slide the AM/FM switch (located on the
side of the unit) to the desired broad-
cast band.
4. Turn TUNING to select a station.
5. Adjust the sound amount by VOLUME.
6. Press ON/OFF to turn off the radio
Built-In AFC
The Built In Automatic Frequency Control
(AFC) works only on FM. It helps reducing
drift on FM reception and keeping the
radio locked in on the FM station to which
it is tuned.
When tuning in FM stations, you may no-
tice that the station you are tuning can
be well-tuned on two or three nearby
points on the dial. Always tune carefully
at the loudest and clearest point.
Antennas
AM Antenna-A built-in ferrite rod antenna
eliminates the need for an outside an-
tenna for AM reception. Rotating the unit
slightly may improve reception of distant
AM stations.
TUNING
+ VOLUME -
RP3715 EN-US 6/21/01, 12:04 PM4
To Next Page
Loading...
Need help?
General
