HDMI / AV
Dimension
18
Speaker
Projection distance
2*5W
1m-4m
No Image is Projected or
a "No Signal" message is
displayed
1.Power light is on. If it is not on, check the
projector is plugged into the power source supply,
that the socket is switched on, and then press the
power button on the projector.
2.Check the lens cover has been removed.
3.Check the cables are securely attached and
installed as per the User Manual.
4.The image source may not be set correctly.
Press the Home button on the Control Panel or
the Remote, to select the correct setting.
5.Check in the Menu section under Video input
signal to make sure that has been set correctly.
Before resorting the maintenance service, please kindly check by yourself with
the following chart.
Symptom
Cause (and Remedy)
LED
White light output ANSI: 250 lm
1920 x 1080
Light Source Type
Brightness Output
Display Native Resolution
HDMI Input Supported
Video Resolution.
1080p , 1080i , 720p, 576i , 480p,480i
Power Consumption Operating 72W; Standby 0.8W
Power Input
Connect Included Adapter
DC 30V , 2.4A
Included Adapter
Connect DC input of unit
Input AC100-240V,50/60Hz
Output DC30V , 2.4 A
Color Temperature
7000-8000K
Best Projection Size Up to 200"
Signal Port
USB 1 Port
Weight
Support USB device up to 1TB
Support format mpeg1, Mpeg2 ,mpeg4, mp3 , Jpeg
1.235KG
231.3x182.8x99.2mm
TROUBLE SHOOTING
To Next Page
Loading...
Need help?
General
