5
EN
Clock & Timer
CLK --:00
ON --:12
VOL 08dB
CLOCK
Setting the Clock
1. Turn on the unit.
2. Press CLOCK twice so that the time
flashes on the display (12-hour clock for
RCA, 24-hour clock for Thomson).
3. Rotate to set the hour
4. Shift to minute digits.
5. Repeat step 3 to set the minute.
6. Press CLOCK to save settings.
Displaying Clock Time
When the unit is off, clock time is always shown on
display.
When the unit is on, you can press CLOCK to display
the current time for about 5 seconds.
1. Press and hold TIMER until ON and
clock time flash on the display ( ON -
timer on time ) (12-hour clock for RCA, 24-
hour clock for Thomson).
Timer
Setting the Timer
2. Rotate to set the hour.
3. Shift to minute digits.
4. Repeat step 3 to set the minute.
5. Shift to audio select.
6. Rotate to select among CD, tuner or
AUX (if available).
8. Rotate to select disc tray (if CD is
selected) or preset station (if TUNER is
selected).
7. Shift to disc tray or tuner station select.
11. Shift to off time select (OFF shows on
display). Repeat steps 2-4 for setting off
time.
12. Press TIMER again to save setting. (Note: Press
TIMER repeatedly to review settings)
Activating the Timer
Press TIMER to turn on/off the timer.
You can select the time interval in minutes
before the unit turns off automatically.
Press SLEEP on the remote to select
among 120, 105, 90, 75, 60, 45, 30, 15 minutes.
Sleep Mode
9. Shift to volume select.
10. Rotate to select volume level.
To Next Page
Loading...
Need help?
General
