9
EN
Loading Discs
1. Press SOURCE repeatedly to select CD mode.
2. Press OPEN/CLOSE to open the disc
compartment.
3. Insert up to 5 discs with label face up.
4. Press OPEN/CLOSE again to close the disc
compartment.
The occupied disc tray icons lights on the display
and the current disc icon flashes on the display.
The current disc number also shows on the left
side of the display.
If the disc is a mp3 / WMA CD, the respective mp3
and WMA icon lights on the display.
Play and Pause Discs
• Press PLAY/PAUSE in stop mode to begin
playback.
•Press PLAY/PAUSE during playback to
pause disc. Press again to resume.
Play and load simultaneously by:
1. Press OPEN/CLOSE to open the disc tray
while a CD is playing.
2. Load/change discs for available trays.
3. Press OPEN/CLOSE again to close the tray.
Stop Playback
During playback, press STOP to stop playback.
CD Player
Attention:
Do not push to force closing of the tray
during CD playback or tray opening.
Note:
Be sure to remove all discs from the disc
compartment before moving or transporting
the unit!
Tips:
In stop mode for mp3 and WMA CDs, press
STOP to return to the first track of
the current disc. The total number of
tracks on the current disc is displayed (TT).
Notes on Simple mp3/WMA
Playback:
• This unit is compatible with simple
mp3/WMA discs. Text information can
not be show (e.g. ID3 tags, song name,
album, artists, etc.).
• It is strongly recommended that you use
a single folder structure for simple
mp3/WMA discs. If there are more than
only layer of folders, the tracks may be
rearranged. (Refer to pg. 17 for simple
mp3/WMA playback sequence)
• The first 100 folders from the first 8
folder levels can be read on this unit.
• The unit reads the first 412 files from
each discs and the first 255 files in each
folder.
To Next Page
Loading...
Need help?
General
