22
TV Type
Depending on the format of the DVD disc,
you can choose the picture format (aspect
ratio) best suited to the format of your
TV screen:
• 4:3 PS: reproduces a 4:3 picture
without distortion.
• 4:3 LB: gives best reproduction of pictures
recorded in this format (i.e. with horizontal
bands at the top and bottom of the screen)
or in 16:9.
• 16:9 (widescreen): reproduces 16:9 format
films in full on a 16x9 screen.
Video Setup
1. Select the Video icon in the main menu
using the left/right arrow buttons.
2. Select a menu option using the up/down
arrow buttons and press OK.
Test Tone
This function is used to test the speaker
setting and change the speaker level. A short
noise comes successively from
each speaker.
Notes:
• Night mode function is available only
on DVD discs recorded in Dolby Digital.
• The receiver speaker distance default
settings are as follows:
Front (FR/FL Dist.)
Center (Cen Dist.)
Surroudn (SR/SL Dist.)
15 ft
15 ft
10 ft
Video
Progressive Function provides high quality
pictures with less flickering. Turn on
Progressive Scan if you used the Component
Video jacks of the unit to connect a TV or
monitor compatible with a progressive
scan signal.
Select P-Scan YPbPr and press OK to activate
Progressive Scan.
Brightness
This option lets you adjust the video brightness
level on a scale of 0 to 12, with 12 being the
brightest.
IMPORTANT!
Once Progressive Scan has been activated,
an image will only be visible on a
progressive scan TV or monitor. If you
choose this option and you do not have a
progressive scan TV or monitor, you may
get a picture with incorrect color or
no color.
Press and hold SUBWOOFER on the front
panel. The video output will be restored
to the standard setting and a picture will
once again be visible on a conventional
analog TV or monitor.
To Next Page
Loading...
Need help?
General
