RCA RTD315 User Manual

Technical Specifications:
Amplifier Section:
RMS Output Power: Dolby Digital Mode with
10% Total Harmonic Distortion
Rear Channels: 32Watts
channel (1KHz, 4Ohm)
Front and Center Channel: 32 Watts
40W(RTD317) per channel (1KHz, 4Ohm)
Subwoofer Channel: 40Watts
(100Hz, 3Ohm)
Total RMS Output Power, Dolby Digital
mode: 200Watts
FTC Output Power: Dolby Digital Mode with
10% Total Harmonic Distortion
Front Channels (L and R): 20 Watts per
Channel (1KHz, 4Ohm)
Rear Channels (L and R): 20 Watts per
Channel (1KHz, 4Ohm)
Center Channel: 30 Watts (1KHz, 4Ohm)
Subwoofer Channel: 35 Watts
(100Hz, 3Ohm)
Total FTC Output Power, Dolby Digital mode:
145 Watts
Muting Attenuation: 70 dB
Frequency Response: 200Hz – 20KHz/3dB,
1KHz ref.
Subwoofer Frequency Response:
20Hz – 200Hz/-3dB, 100Hz ref.
Signal to Noise Ratio: 70 dB
(Dolby digital mode)
AM Tuner Section:
Frequency Response: 2kHz +/-3dB, 400Hz ref.
Usable Sensitivity: 3000uV/m @ S/N 20dB
Signal to Noise: 38dB
IF Rejection: 35dB
FM Tuner Section:
Frequency Response: 15kHz +/-3dB, 1kHz ref.
Quieting: 24dB
Signal to Noise: 62dB(stereo) / 65dB(mono)
IF Rejection: 70dB
Dimensions (H x W x D mm) :
Unit: 66 x 360 x 294
Front Speakers: 201 x 102 x 58
Center Speaker: 102 x 252 x 58
Rear Speakers: 201 x 102 x 58
Subwoofer: 311 x 172 x 270
27
Additional Information
EN

RCA RTD315 Specifications

General

Brand	RCA
Model	RTD315
Category	Home Theater System
Language	English