RCA RTS7131B User Manual

5
EN
Before Bluetooth pairing, you should turn on the
Bluetooth function of your other device (such as,
mobilephonewithBluetoothfunction).
1.PressSOURCEbuttonontheunitor
button on
theremotecontroltoselectBT(Bluetooth)mode.
The Bluetooth indicator light on the soundbase
willblink.
2.Onyourdevice(mobilephone,MP3player,etc.),
select RCA RTS7131B from the list of available
Bluetoothconnections.
 Note: If your Bluetooth device (such as, mobile
phone)requiresapasswordwhilepairing,please
enter4-digitnumber:0000.
• If the Bluetooth pairing is successful, the
Bluetoothindicatorwillilluminate.
• If the Bluetooth pairing is unsuccessful, the
Bluetooth indicator will blink at slow speed.
Pleasetryagain.
TO DISCONNECT THE CURRENTLY pAIRED
DEvICE
1. On your currently paired and connected device,
selectRCARTS7131Bfromthelistanddisconnect
it. Or
2.Turnofftheconnecteddevice.
ENjOY THE MUSIC THROUGH BLUETOOTH
• Press tobeginorpauseplayback
• Press
/ toselectaspecictrack
• Press and hold 
 /  to start moving
backward/forwardathighspeed.
BLUETOOTH pAIRING BASIC OpERATION
1. Press buttonontheSoundbaseor button
on the remote to turn on the unit.
2. Press SOURCE  / or AUX, OPTICAL, LINE
IN and
buttondirectlyontheremotetoselect
AUXIN,OPTICALIN,LINEINorBluetoothsource
(input).TheLEDslocatedontopofSoundbase
willindicatethecurrently-selectedsource.
3. PressVOL
/ ,BASS / orTREBLE /
ontheremotetoadjustVolume,BassorTreble
levels. When adjusting Volume,Bassor Treble,
thefourLEDswilltemporarilydisplaythecurrent
levelsetting(seeillustration).
Note:Whenmuteisenabled,the4LEDindicators
will ash. Press the MUTE button on the remote
controltodisablethemutefunctionandLEDashing
stop.
Specicationsandexternalappearancearesubjecttochangewithoutnotice.
TROUBLESHOOTING
Theunitdoesnotswitchon.
• Makesureitispluggedin.
• Press STANDBY/ON button to turn on the
Soundbase.
Ihavenosound.
• PresstheVOLUME
/ button on the top of the
SoundbaseorVOL
/ button on the remote.
• Ensure the source you’ve selected is outputting
audio.Ifyou’reusing“audioout”fromyourTV,
ensureyourTVisconguredtooutputaudio(see
TV’smenusettings).
• Ensure your AV connections are properly made
(ensureyoudon’thaveanylooseconnections).
• Ensureyou’veselectedthecorrectsource(input)
-theLEDslocatedonthetopoftheSoundbase
willindicatethecurrently-selectedsource(input).
• Mute is activated (the 4 LEDs on top of the
Soundbaseashes).Pressthemutebuttononthe
remotecontrol.
• EnsuretheinputsourceisselectedPCMoutputon
thesetupmenuoftheinputdevice.
CannotsetupBluetoothpairing
• Resetthebluetoothconnectionbyturningoffand
onyourconnectinddevice,orthisSoundbase,or
selectotherSOURCEonthisSoundbasethenback
toBTmodeagain.
Theremotecontroldoesn’twork
• Ifbatteryisweak,pleasereplacethebatteryand
ensurethenewbatteryisinstalledcorrectly.
• Pleaseensurethereisnothingblockingtheremote
sensoronthefrontoftheSoundbase.

RCA RTS7131B Specifications

General

Brand	RCA
Model	RTS7131B
Category	Speakers
Language	English