RCA systemlink 4 User Guide

Programming Your Universal Remote
Programming a Device using the Code Lists
1. Find codes for each device and brand on
page numbers shown below.
2. Press and hold CODE SEARCH.
3. Press and release the TV, VCR, or CABLE
button you want to set up. If programming
AUX for a device, press and release A UX first
and then the device to be programmed (TV,
VCR, Cable Box). When the selected device
button flashes proceed to the next step.
4. Enter the three digit code from the
TV, VCR
or Cable Box code list.
Device
Page
TV 9
VCR
10
Cable Box 11
5. Release CODE SEARCH.
6. With the device on, press another button,
for example CHANNEL UP. If the device
responds, no further programming is
required.
If the device does not respond,
repeat 2-5 using another code.
7. Enter your device codes here for easy reference.
, TV CODE.'
DDD
VCR CODE
DDD
4
PRESS
& HOLD
-
•
CODE
SEARCH
@
AUX CABLE VCR TV
000 0
ENTER
YOUR
(ODE
1(/0
3
0
40
5
0
6
0
70
8
0
9
0
00
RELEASE ~
CODE
SEARCH
@
CHAN
CABLE BOX,CODJ:
ODD
AUXCODE
DDD

RCA systemlink 4 Specifications

General

Device Type	Remote Control
Brand	RCA
Model	Systemlink 4
Category	Remote Control
Compatibility	RCA
Power Source	Battery