RCA systemlink 4 User Guide

Operating A VCR
Tum the VCR On and Off.
1 . Press VCR to set the remote to control the
VCR. (Most RCA, GE and ProScan models
will only
turn on when pressing VCR not
OFF/ON).
2. Press OFF/ON to tum the VCR on or off.
Watch a tape in your VCR.
1 .
Turn on the VCR.
2. Insert a tape in the VCR.
3. Press PLAY to start the tape.
4. Press
STOP when you are finished.
5. Press
REW to rewind the tape.
6. Press PAUSE to pause the tape.
Record one channel and watch another.
1 . Press VCR to set the remote to control
the
VCR. If you programmed AUX
for a VCR, press AUX.
2. Tune the VCR to the channel
you want to record.
3. Press
REC to start recording.
4. Press
TVNCR.
5. Press TV to set the remote to control the TV.
6. Press CHANNEL UP or DOWN to
change
channels on the TV.
7. To see the channel you are recording,
tune the TV to channel 3 or 4
(same as CH3 / 4 switch
on the VCR).
AUX CABLE VCR TV
001 0
OFF/ON
•
PLAY
~
STOP
•
REW
•
PAUSE
•
0010
\0\0
3
0
40
5
0
6
0
70
8
0
9
0
EiROo
REC
(I)
TY/VeR
e
CHAN
•
CHAN
T
7

RCA systemlink 4 Specifications

General

Device Type	Remote Control
Brand	RCA
Model	Systemlink 4
Category	Remote Control
Compatibility	RCA
Power Source	Battery